LOG PLACEMENT
Before you begin — This unit is supplied with one ceramic fiber log. Do not handle the log with your bare hands.
Always wear gloves to prevent skin irritation from ceramic fibers. After handling the log, wash your hands gently
with soap and water to remove any traces of fibers.
WARNING
The positioning of the logs are critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance. Never add additional logs or embellishments such as pine cones, vermiculite or rock wool to the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only parts specifically approved for this heater may result in property damage or personal injury.
INSTALLING LOG ON GRATE (See Figure17)
Carefully place
PLACING THE DECORATIVE ROCK
| DO NOT sprinkle volcanic rock on the |
| logs or around the pilot or the main |
CAUTION | burner. This may cause sooting. Place |
heater, burning logs will give off a paper | |
| volcanic rock only on the floor of the |
| fireplace. |
| During initial operation of the new |
| burning smell and orange flames will |
| be present. Simply open the windows |
| for a few hours to vent the odor. |
Pins
Figure 17 - Installing Logs to Grate
22 | 43D0122 |
