OPERATING INSTRUCTIONS
FOR YOUR SAFETY READ BEFORE LIGHTING
A.This appliance is equipped with an ignition device (Piezo) which automatically lights the pilot. Do NOT try to light the burner by hand.
B.BEFORE OPERATING smell all around the appli- ance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.
WARNING
WHAT TO DO IF YOU SMELL GAS:
• Turn off all gas to the appliance.
• Open windows.
•Do not attempt to light any appliance.
•Do not touch any electric switch; do not use any phone in your building.
•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
•If you cannot reach your gas supplier, call the fire department.
C.Turn off all electric power to appliance.
D.Do not use this appliance if any part of it has been under water. Immediately call a qualified service tech- nician to inspect the appliance and to replace any part of the control system and any gas control that has been under water.
LIGHTING ELECTRONIC IGN
1. STOP! Read the safety information above.
2. Set thermostat to lowest setting. Then turn switch to off posi- tion.
3. Turn off all electric power to the appliance.
4. This appliance is equipped with an ignition device which auto- matically lights the burner. Do not try to light the burner by
hand.
5. Wait 5 minutes to clear out any gas. Then smell for gas, includ- ing near the floor. If you smell gas STOP! Follow “B” — What
to Do if You Smell Gas above. If you do not smell gas, go to the next step.
6.Turn on all electric power to appliance.
7.Set thermostat to desired setting or turn
8.If the appliance will not operate, follow the instruction To Turn Off Gas below and call your service techni- cian or gas supplier.
TO TURN OFF GAS
1.Turn
2.Turn off all electric power to the appliance if service is to be performed.
3.Close lower door.
62D4036 | 27 |
