Monessen Hearth SBV400 Vent Installation, Firestop Installation, Installing Firestop In Attic

Models: SBV400 BBV400 SBV500

1 42
Download 42 pages 53.86 Kb
Page 15
Image 15
FIRESTOP INSTALLATION

VENT INSTALLATION

FIRESTOP INSTALLATION

To position firestop see Figures 9 and 10. Only one (1) firestop required per frame.

NOTE: A firestop is not required at the roof.

Nails

Joist

NOTE: A firestop is not required at the roof.Figure 9 - Installing Firestop In AtticFigure 10 - Installing Firestop In CeilingManual background Firestop

Spacer

Firestop

JoistSpacer Manual background

Nails Manual background

Figure 9 - Installing Firestop In Attic

Figure 10 - Installing Firestop In Ceiling

NOTICE NOTICEManual background

When installing in a chase, you should insulate the chase as you would the outside walls of your home. This is especially important in cold climates. Insulation should be considered a combustible material. Maintain proper clearances to all combustible materials.

Treatment of firestops and construction of the chase may vary from building type to building type. These instructions are not substitutes for the requirements of local building codes. You must follow all local building codes.

62D4036

15

Page 15
Image 15
Monessen Hearth SBV400, SBV500, BBV400 Vent Installation, Firestop Installation, NOTE A firestop is not required at the roof