Monster Cable HTS5000 owner manual Hookup Guide, DBS/DVD/Phone Line Hookup, b, c

HOOKUP GUIDE

STEP 1 DBS/DVD/Phone Line Hookup

NOTE:

The PowerCenter is intended for hookup of a single phone line only. A second line will NOT be connected through the phone line surge protector. You can use this feature as a phone splitter, however. If the “PHONE IN USE – OUT 1” LED is on, the phone or Pay-Per-View device plugged into the OUT 1 outlet is in use and Monster’s Access Control Unit disengages the OUT 2 outlet. If the “PHONE IN USE – OUT 2” LED is on, the phone or Pay-Per-View device plugged into the OUT 2 outlet is in use and Monster’s Access Control Unit disengages the OUT 1 outlet.

FOR PAY-PER-VIEW DEVICES (SUCH AS DBS)

A)Connect one end of a phone cable into a telephone wall jack. Plug the other end into the HTS 5000 “IN” jack (figure 1a).

B)Connect a second phone cable from one of the HTS 5000 “OUT” jacks to the Pay-Per-View input on your DBS receiver or DVD player (figures 1b and 1c).

FOR STANDARD TELEPHONE LINE PROTECTION (NOT A PAY-PER-VIEW DEVICE)

A)Connect a phone cable from a telephone wall jack to the HTS 5000 “IN” jack. Connect a second phone cable from one of the HTS 5000 “OUT” jacks to the telephone (figures 1b and 1c).

Figure 1a

From telephone wall jack

IN OUT 1

PHONE

OUT 2

Figure 1

Figure 1b

To DBS receiver, DVD player, or telephone

Figure 1c
To DBS receiver, DVD player,
or telephone	6