Monster Cable HTS5000 owner manual Video AC Outlet Hookup

STEP 8 Video AC Outlet Hookup

Isolated Clean Power Stage 4 Video Filter: Optimized to reduce noise generated by video equipment. Isolates video components from connected digital, analog audio and video components for maximum rejection of interference.

NOTE:

You may want to program these outlets to be “unswitched” (see page 7, fig. 2a) because some components perform best when powered continuously. A VCR, for example, should be plugged into one of these outlets to avoid the hassle of resetting its clock when power is interrupted. Whether you turn your PowerCenter on or off, any component plugged into these outlets can receive power continuously as long as your PowerCenter is plugged into a properly grounded 120-volt wall socket and the OUTLET PROGRAMMING SWITCHES for the outlet pair are set to “unswitched”. You can plug any type of analog video component (e.g., VCR, camcorder) into these two Video AC outlets.

A)Attach a Monster Power® ID label to each component’s power cord before you plug it into the appropriate color-coded PowerCenter outlet.

B)VCR: Plug your VCR’s power cord into the PowerCenter’s corresponding AV RECEIVER outlet.

C)TV: Plug your TV’s power cord into the corresponding TV outlet.

IN CABLE TV OUT NORMAL

OUTLET PROGRAMMING SWITCHES

REMOTE

UNSWITCHED SWITCHED DELAY NO DELAY

1	IN	OUT 1
2

SATELLITE

1 2 3 4 5

INOUT

3

4

5

REMOTE

AC INPHONE

110V

OUT 2

GROUND		SHORT	LONG	DELAY TIME
		(6 seconds)	(20 seconds) SWITCH
		DELAY	NO DELAY	TRIGGER OUT	DC IN
				SWITCH
					9~12V 300MA
			DC OUT 9~12V 300MA
IN	ANTENNA	OUT			BREAKER 15A
					PRESS TO RESET	1800W MAX TOTAL

14