LIT_PRO7000_manual.qxd 11/10/2003 4:30 PM Page 23
NUMBERS REFER TO DRAWINGS ON PAGE 18
24.Computer Filter Fuse: 10A slow-blow fuse protects the COMPUTER FILTER from power overload. Replace only with the same type/rating fuse.
25.High Power Filter 1 Outlets: Optimized for high-current analog components such as subwoofers or a main amplifier, special filter circuits reduce noise from the AC power line that normally degrades analog performance.
NOTE: Digital or low-current analog equipment will not be harmed if connected to the high power outlet. However, for best performance, we recommend using only high-current analog components with these outlets.
26.Noise Reduction Mode Switch: Default position for this switch is Normal Isolated for Clean Power Stage 5 filtering and ground-lifted Noise Reduction Mode transformer operation. Balanced setting offers Stage 5 Clean Power filtering and ground-referenced Noise Reduction Mode transformer operation.
NOTE: The switch effects all three GFI (Ground Fault Indicator) outlet pairs; Analog, Digital 1 and Digital 2. A small screwdriver is needed to change the default setting as shipped from the factory (Normal Isolated Mode).
