Motorola A780 manual Using Voice Recognition, Voice Command List

Press and hold the voice recognition (VR) key on the left side of your phone until the Loading VR message displays on the screen to indicate that voice recognition is loading.

When your phone displays Load Successful, you can start using voice commands. If your phone indicates that loading failed, try again to load the voice recognition application.

Using Voice Recognition

After loading the voice recognition application on your phone, press and hold the VR key on the left side of your phone until the phone sounds an alert tone. Speak a voice command as described below, then release the VR key to perform the corresponding function.

The voice command function operates in 2 modes: name/instruction mode, and digit mode. The default operating mode is name/instruction. When you speak the command “Open Digit Dial” or “Open Dial Pad,” your phone switches to digit mode so you can speak the phone number you want to dial.

Note: Your phone remains in digit mode for a few seconds after each number recognition, and then automatically returns to name/instruction mode.

Voice Command List

Note: This section lists key voice commands. To see a complete list of voice commands, tap T Setup, tap Voice Command, then tap Commands List.

Press and hold the VR key, and speak the voice command as described to perform the corresponding function. If your

Phone Setup 149