Motorola B5, B7 operating instructions Button to hang up. The radio will return to

30Trunked Radio Features Operation (cont.)

Trunked Telephone Operation (cont.)

Calling the Last Number Dialed

1.Press the phone button (normally the orange top button). The display shows the last telephone

number dialed.

2.The radio's default programming is delayed access. Press the PTT switch to send out the

displayed telephone number. The display shows “PLEASE WAIT” while the radio attempts to access the telephone system.

Notes:

•This is a timed message. If you cannot

access the telephone system (no dial tone heard), press the HOME key to hang up, and start again at step 1 of this procedure.

•If you are out of range of the trunked system or the phone interconnect is out of service, “NO PHONE” is displayed and a

continuous low-pitched tone sounds.

3.If the access was successful, you will hear a dial tone. The display will show the last number. The telephone number will be sent out, and you will hear either a busy signal or ringing. If you hear a busy signal, go to step 5 for hang up procedure.

4.If the party you are calling answers, begin your conversation. Press the PTT switch to talk; release the PTT to listen.

Note (B7 Model Only): If, after reaching the number you are calling, you need to dial an extension number before you can reach your party, enter the extension number from the keypad. Press the PTT.

5.When you have finished your conversation, or if the number you are calling is busy or does not answer, press the HOME key or the phone

button to hang up. The radio will return to the	1	2 A B C	3 D E F
home display.	4 G H I	5 J K L	6MNO
	7P R S	8 T U V	9 W X Y
		0
		HOME