Motorola B7, B5 operating instructions Trunked Radio Features Operation

61Trunked Radio Features Operation (cont.)

Call Alert Page Operation (cont.)

5.Enter the second digit of the location number. The display shows the location number for a few seconds.

6.Then, the radio goes to that position in the list, and the display alternates between showing that list member’s name and ID number.

Note: If you enter a location number that does not exist (for example, “24”), the display will show “INVALID ENTRY,” and the radio will sound an invalid-keypress tone and return back to step 4 of this procedure.

7.Press the PTT switch to send the ID number.

8a. If you hear five beeps, the ID number has been received by the system, and the radio you are paging is on the air and has received your page. The radio automatically returns to the home display.

or

8b. If you hear one beep, the ID number has been received by the system, but the radio you are paging is not on the air; your radio remains in the Call Alert mode. You can either go back to step 5 and press the PTT switch to send the ID number again, or press the HOME key or the page key (normally side button 2) to hang up and return to the home display.

Note: If after six seconds the called radio fails to acknowledge the alert, a low-pitched alert tone sounds and the display shows “NO ACKNOWLEDGE.” Try again or press the HOME key to exit.

1	2 A B C	3 D E F
4 G H I	5 J K L	6MNO
7P R S	8 T U V	9 W X Y
	0
	HOME