64Conventional Radio Features Operation (cont.)
Conventional Telephone Operation (cont.)
3.When you have finished entering your number, press the PTT switch. The display will show
“PLEASE WAIT” while your radio attempts to access the telephone system.
Note: If you could not access the telephone system (no dial tone heard), press the HOME key to hang up, and start again at step 1 of this procedure.
4.If the access was successful, you will hear a dial
tone. The display will again show the number dialed.
5.To place the telephone call, press the PTT button again. The telephone number will be sent out; you will hear tones as they are being sent. When the number has been completely sent out, you will hear either a busy signal or ringing.
6.If the party you are calling answers, begin your conversation. Press the PTT switch to talk; release the PTT to listen.
Note (Model B7 Only): If, after reaching the number you are calling, you need to dial an extension number before you can reach your party, enter the extension number from the keypad, then press the PTT switch again.
7.When you have finished your conversation, or if
the number you are calling is busy or does not |
|
|
|
answer, press the HOME key or the phone |
|
|
|
button to send the |
|
|
|
return to the home display. | 1 | 2 A B C | 3 D E F |
| 4 G H I | 5 J K L | 6MNO |
| 7P R S | 8 T U V | 9 W X Y |
|
| 0 |
|
|
| HOME |
|
