DCT5100User Guide
PreliminaryCopy 5/01/03 25
Connecting a Stereo TV, VCR, and DVD
This cable configuration may be used for a mono or stereo VCR,
because the VCR audio and video jacks are not used.
If your TV supports multiple sets of video and audio inputs (such as
VID1, VID2, etc.), see the diagram Connecting a Stereo TV and Stereo
VCR to connect your DCT5100, VCR and TV. When you have completed
those connections, refer to the diagram illustrated here to connect your
DVD to your TV.
1Connect an RF coaxial cable to the cable wall outlet and the CABLE
IN connector on the DCT5100.
2Connect an RF coaxial cable to the TO TV/VCR connector on the
DCT5100 and the CABLE/ANTENNAIN connector on the VCR.
3Connect an RF coaxial cable to the TO TV connector on the VCR
and the CABLE/ANTENNAIN connector on the stereo TV.
4Connect a stereo audio cable to the INPUT AUDIO LEFT and RIGHT
connectors on the stereo TV and the AUDIO OUT ANALOG R and L
connectors on the DVD.
5Connect a video cable to the INPUT VIDEO connector on the stereo
TV and the VIDEO OUT VIDEO connector on the DVD.
Or
Connect an S-video cable to the INPUT S-VIDEO connec tor on the
stereo TV and the VIDEO OUT S-VIDEO connector on the DVD.
The video connection method does not support high definition video. For
more information, see “Connecting your DCT5100 to an HDTV – Video
Only” on page 16.