PreliminaryCopy 5/01/03 6

BASICOPERATION

Turning Power On and Off
PressPOW ER on the front panel to turn the DCT5100 on or off. When
using the remote control, be sure it is in cable mode by pressing CABLE
before pressing POWER.
Changing Channels
You can change channels in two ways:
•PressCHAN NEL or on the front panel oft heDCT 5100,or
press CHANNEL or on the remote control to step through the
channel selection.
•Enter the number of the channel you want to tune using the
number keys on the remote control.
Adjusting the Volume
PressVO LUME or on the remote control to adjust the volume. When
you adjust the volume, the volume scale is displayed on the screen.
Press MUTE on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the DCT5100 to
approximately ¾of the maximum volume level and then adjust the
audio levels on external devices such as your TV or A/V Receiver.
Interactive Program Guide
The interactive program guide displays information about TV programs
and enables you to access features such as Parental Control or
Pay-Per-View. Interactive program guides can vary with each cable
service provider. Refer to the interactive program guide instruction
manual for detailed instructions.