1 |
•On the Installation Settings menu, choose option 2 (Set Remote Control Address).
Now follow the instructions on the Remote Control Address screen.
•If you have four receivers, you will have to change the addresses on three of them: they will have address of 0000, 0001, 0002, and 0003.
To program your remote control for each receiver, hold down the SAT key on the remote control until the light flashes. Once the light begins to flash enter the desired address.
System Status
This is a
Trip Counter. Trip Counter displays the number of message updates from your service provider.
Authorization Screens
Sometimes when you tune to a program, an Authorization screen will appear. It will fade to black after a short time, it will reappear when:
•The channel or program is locked out because of your parental control setting, which requires you to enter a password. (If you have not set a password, just press the ENTER key.)
•The receiver is not authorized.
•A subscription is required to receive the program.
•There is a program blackout in your area.
•There is a technical problem.
8
