Panasonic DMC-GM1 owner manual 275, Select the wireless access point you are connecting to

12. Using the Wi-Fi function

If you are not sure about the WPS compatibility (connecting by [Manual Connection])

Search for available wireless access points.

•Confirm encryption key of the selected wireless access point if the network authentication is encrypted.

•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using.

1Select the wireless access point you are connecting to.

•Pressing [DISP. ] will search for a wireless access point again.

•If no wireless access point is found, refer to “When connecting with [Manual Input]” on P275.

2(If network authentication is encrypted) Enter the encryption key.

•For details on how to enter characters, refer to “Entering Text” section on P54.

∫When connecting with [Manual Input]

1On the screen displayed in step 1 of “If you are not sure about the WPS compatibility (connecting by [Manual Connection])”, select [Manual Input].

2Enter the SSID of the wireless access point you are connecting to, then select [Set].

•For details on how to enter characters, refer to “Entering Text” section on P54.

3Select the network authentication type.

•For information on network authentication, see the manual of the wireless access point.

4Select the encryption type.

•The type of settings that can be changed may vary depending on the details of network authentication settings.

Network authentication type	Encryption types that can be set
[WPA2-PSK]	[TKIP]/[AES]
[WPA-PSK]	[TKIP]/[AES]
[Common Key]	[WEP]
[Open]	[No Encryption]/[WEP]

5(When an option other than [No Encryption] is selected) Enter the encryption key.

275