Panasonic DMC-GM1 owner manual 248, Sending images in the camera to an SNS

12. Using the Wi-Fi function

Sending images in the camera to an SNS

1Connect to a smartphone/tablet. (P246)

2 Select [ ] on a smartphone/tablet.

3 Drag an image to send it to an SNS, etc.

•The image is sent to a web service such as an SNS.

•The function can be assigned to the top, bottom, left or

right according to your preference.

Sending location information to the camera from a smartphone/tablet

You can acquire location information from a smartphone/tablet, and write it on images afterwards.

Refer to P224 for how to write the location information on the images recorded by this unit.

•Read the [Help] in the “Image App” menu for further details on how to operate.

•To change the setting or disconnect, press [Wi-Fi]. (P242)

•Cautions for Use:

Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use this function. Use at your own risk.

•If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync], perform [Time sync] again.

•On the smartphone/tablet, you can set the acquisition interval of location information and check the transfer status of location information.

Refer to [Help] in the “Image App” menu for details.

•(When using “Image App” for iOS)

If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working, location information recording is stopped.

Not available in these cases:

•The smartphone/tablet may fail to acquire location information in China and the border area in the neighbouring countries of China.

(As of October 2013)

248