Panasonic DMC-GM1 owner manual 295, Press 3/4 to select PC, and then press MENU/SET

13.Connecting to other equipment

∫Transferring images to a PC Preparations:

Install “PHOTOfunSTUDIO” to the PC.

1Connect the computer and camera with the USB connection cable (supplied).

•Please turn this unit on and your PC before connecting.

•Check the direction of the terminals and plug in/out straight holding onto the plug.

(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.)

Do not connect devices to incorrect terminals. Doing so may cause malfunction.

•Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).

AUSB connection cable (supplied) B Align the marks, and insert.

C Place the camera in an upright position, and find the gold terminal at the bottom.

2 Press 3/4 to select [PC], and then press [MENU/SET].

•If [USB Mode] (P49) is set to [PC] in the [Setup] menu in advance, the camera will be automatically connected to the PC without displaying the [USB Mode] selection screen.

•When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], a message may appear on the PC screen. In that case, close the message, and remove the USB connection cable safely, and then set the [USB Mode] to [PC].

3 Copy the images to a PC using “PHOTOfunSTUDIO”.

•Do not delete or move copied files or folders in Windows Explorer.

When viewing in “PHOTOfunSTUDIO”, you will not be able to play back or edit.

295