Panasonic DMC-GM1 338, Card is not recognized by the PC, Ends of the pictures are cut at printing

14. Others

The card is not recognized by the PC.

•Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

•If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal.

The card is not recognized by the PC. (SDXC memory card is used.)

•Check if your PC is compatible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.html

•A message prompting to format the card may be displayed when connecting, but do not format.

•If the [Access] displayed on the monitor does not disappear, disconnect the USB connection cable after turning this unit off.

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer that does not support PictBridge. > Set to [PictBridge(PTP)] in [USB Mode]. (P49, 299)

The ends of the pictures are cut at printing.

•When using a printer with a Cropping or borderless printing function, cancel this function before printing.

(For details, refer to the operating instructions for the printer.)

•When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed.

338