Panasonic DMC-GM1 owner manual 169, Focus on the subject and take a picture

7.Shutter and Drive Settings

•The burst speed may become slower depending on the following settings.

–[Picture Size] (P128)

–[Quality] (P129)

–[Sensitivity] (P158)

–Focus mode (P136)

–[Focus/Release Priority] (P146)

•Burst speed can also be set with [Burst Rate] in the [Rec] menu.

•Refer to P129 for information about RAW files.

4 Focus on the subject and take a picture.

•Hold down the shutter button fully to activate the Burst Mode.

60 i	4:3	AFS	H
	L

∫Canceling the Burst Mode

Select [ ] ([Single]) or [ ] from among the drive modes. (P167)

Focusing in Burst Mode

The way focus is achieved varies according to the focus mode (P136) setting and the [Focus/Release Priority] (P146) setting in the [Custom] menu.

Focus mode	[Focus/Release	Focus
	Priority]
[AFS]	[FOCUS]	At the first picture
	[RELEASE]
[AFF]/[AFC]¢1	[FOCUS]	Normal focusing¢2
	[RELEASE]	Predicted focusing¢3
[MF]	—	Focus set with Manual Focus

¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first picture.

¢2 The burst speed may become slower because the camera is continuously focusing on the subject.

¢3 Burst speed takes priority, and focus is estimated within possible range.

169