Panasonic DMC-GM1 owner manual 314, This battery cannot be used, No picture to send

14. Others

[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]

•Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P50)

•This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P295, 299)

[Editing operation cannot proceed as information processing is ongoing.]

• When there are too many image files, the currently retrieving information icon ([		] or
[	]) may be displayed on the playback screen for a long period of time. During this time,
deletion and use of the [Playback] menu are not possible.

–If this unit is turned off while acquiring information, only the pictures that have already acquired the information are saved as a group.

When you switch on again, the information retrieval will restart from the same point.

[This battery cannot be used]

•Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or Panasonic.

•If the battery terminal is dirty, clean it and remove any objects.

[Failed to connect wireless access point]/[Connection failed]/[No destination found]

•Check following regarding the wireless access point.

–The wireless access point information set on this unit is wrong.

Check the authentication type, encryption type, and encryption key. (P275)

–Power of the wireless access point is not turned on.

–Setting of the wireless access point is not supported by this unit.

•Check the network setting of the destination.

•Radio waves from other devices may block the connection to a wireless access point. Check other devices that are connected to the wireless access point and devices that use the 2.4 GHz band.

[No picture to send]

•This is displayed when there is no image to transmit due to the restriction of the destination. Check the file format of the image to send. (P280)

[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer stopped.]

•Radio waves from the wireless access point are getting weak. Perform the connection closer to the wireless access point.

•There is no reply from the server or it has exceeded the communication processing time. Try again after a while.

•Depending on the wireless access point, connection may be automatically disconnected after specific time has passed.

Reconnect the connection again.

314