Panasonic DMC-GM1 198, Changing the settings for a power zoom lens, Custom Power Zoom Lens

9. Stabilizer, Zoom and Flash

Changing the settings for a power zoom lens

Applicable modes:

Sets the screen display and lens operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom).

This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom).

•The interchangeable lenses (H-FS12032/H-H020A) are not compatible with power zoom. (For compatible lenses, please refer to our website.)

[MENU] >	[Custom] > [Power Zoom Lens]
	When you zoom, the focal distance is
[Disp Focal	displayed and you can confirm the zoom
	position.	A
			B
Length]	A Focal distance indication

BCurrent focal distance

[ON]/[OFF]

	When you operate the zoom with this setting
	[ON], the zoom will stop at positions
		C
	corresponding to predetermined distances.
[Step Zoom]	C Step zoom indication

•[Step Zoom] is disabled during motion picture recording.

[ON]/[OFF]

When you turn this unit on, the zoom positions when you last turned this unit [Zoom Resume] off are automatically restored.

[ON]/[OFF]

	You can set the zoom speed for zoom operations.
	• If you set [Step Zoom] to [ON], the zoom speed will not change.
[Zoom Speed]	[Photo]:
	[H] (High speed)/[M] (Middle speed)/[L] (Low speed)
	[Video]:
	[H] (High speed)/[M] (Middle speed)/[L] (Low speed)
	This may only be selected when a power zoom-compatible lens with a zoom
	lever and zoom ring is attached.
[Zoom Ring]	When set to [OFF], the operations controlled by the zoom ring are disabled
	to prevent accidental operation.
	[ON]/[OFF]

198