9. Stabilizer, Zoom and Flash

Adjust the flash output

Applicable modes:

Adjust the flash brightness when pictures taken with the flash are over or underexposed.

1Select the menu. (P37)

[MENU] > [Rec] > [Flash]

2Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].

3Press 2/1 to set the flash output and then press [MENU/SET].

You can adjust from [j2 EV] to [i2 EV] in steps of 1/3 EV.

Select [n0] to return to the original flash output.

[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.

Synchronizing the output of the built-in flash to the Exposure Compensation

Applicable modes:

When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the built-in flash will automatically be set to the level appropriate to the selected Exposure Compensation.

For details on Exposure Compensation, refer to P157.

Correcting red eyes

Applicable modes:

When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture.

[MENU] > [Rec] > [Red-Eye Removal]

Settings: [ON]/[OFF]

[] is displayed on the icon when it is set to [ON].

Not available in these cases:

Under certain circumstances, red-eye cannot be corrected.

207

Page 207
Image 207
Panasonic DMC-GM1 owner manual 207, Adjust the flash output, Correcting red eyes, Menu Rec Red-Eye Removal Settings ON/OFF