9. Stabilizer, Zoom and Flash

Taking pictures by using the flash

Applicable modes:

Open/Close the built-in flash

Taking a picture using the flash becomes possible by opening the built-in flash.

A To open the flash

Slide the flash open lever.

B To close the flash

Press the flash until it clicks.

Check that the flash is retracted in a horizontal position.

Forcibly closing the flash can damage the camera.

Be sure to close the built-in flash when not in use.

The flash setting is fixed to [Œ] while the flash is closed.

Be careful when opening the flash as the flash will jump out.

Be careful not to catch a finger when closing a flash bulb.

Forcing the flash off ([Œ])

When the flash is closed or pictures cannot be taken with the flash due to motion picture recording, etc., [Œ] (forced flash off) is displayed on the recording screen and the flash will not fire.

Close the flash in places where its use is prohibited so that it will not fire.

200

Page 200
Image 200
Panasonic DMC-GM1 owner manual Taking pictures by using the flash, 200