Motorola GP68 operation manual Number of Trunking Channels

Model ST-865M3 SmarTrunk II ™ Logic Board

Table 4-1summarizes the programmable features, the keypad sequence for programming, and the default values as provided by the factory.

Each feature programmed requires the following steps:

a.Enter a two digit programming code.

b.Press the # key (indicates end of programming code sequence).

c.Enter the data necessary to program that feature.

d.Press the # key (indicates end of data sequence).

Many of the programmable parameters required for proper operation of the ST-865M3 MUST be provided by the System Operator/Manager. These features are indicated by an asterisk (*) at the beginning of the feature name.

After each feature is successfully programmed, a high frequency beep will be generated. A low frequency beep indicates an error was made in the programming sequence and the sequence should be repeated.

To return the radio to normal operation after programming is complete, turn the power of the radio off and then back on.

See (Table 4-1) ~ Programming Options Summary Table.

4.2.1Number of Trunking Channels

This program code sets the number of trunking chan- nels that are used in a SmarTrunk II trunking system.

To program the number of trunking channels: Enter the program code 10 followed by the # key, then the number of trunking channels in your system, followed by the # key.

Example: If your trunking system is a five channel

system press: 1 0 # 5 #.

32