Motorola GP68 Clear Channel Alerting Mode, Radio-Kill, Memory Speed Dial Programming

Model ST-865M3 SmarTrunk II ™ Logic Board

4.2.10Clear Channel Alerting Mode

Clear channel alerting mode notifies the subscriber when a radio channel becomes available.

To program the Clear Channel Alerting feature: Enter the program code 24 followed by the # key, and then either 1 (enable) or 0 (disable) followed by the # key.

Example: To enable Clear Channel Alerting press: 2 4 # 1 #.

Note: 24 # 0 # disables this function

4.2.11Radio-Kill

This programming code is used to reactivate a Portable Radio that has been remotely disabled with the Radio- Kill function from the ST-852M.

Example: To re-activate a Portable Radio press: 2 5 # 0 #.

4.2.12Memory Speed Dial Programming

This program code controls a subscriber’s ability to program speed dial numbers. If enabled, the subscriber can program speed dial numbers using the Portable Radio’s keypad. If it is disabled, the subscriber can not program speed dial numbers. This does not prevent a subscriber from speed dialing if numbers have been programmed. The System Operator/Manager can pre- program some memory speed dial numbers for the sub- scriber, and then disable the Memory Speed Dial Pro- gramming. The subscriber can then call the System Operator/Manager’s programmed numbers.

To program the Memory Speed Dial Programming fea- ture: Enter the program code 26 followed by the # key, and then either 1 (enable) or 0 (disable) followed by the

# key.

Example: To disable Memory Speed Dial

Programming press: 2 6 # 0 #.

38