Motorola GP68 operation manual Return To Radio Default Values, Trunking System ID Number

Model ST-865M3 SmarTrunk II ™ Logic Board

The sequence for programming the five digit access code requires the dealer to enter the five digit number two times. This insures that no mistakes are made dur- ing the entry of a new access code.

To change the five digit access code: Enter the program code 16 followed by the # key, then the new five digit access code followed by the # key. Then enter the five digit access code a second time, followed by the # key. If the new access code was entered the same both times, the programming of the new access code will be ac- cepted.

To change the five digit access code to 45678 press:

1 6 # 4 5 6 7 8 # 4 5 6 7 8 #

4.2.6Return To Radio Default Values

This programming feature will return the contents of the EEPROM to the default values as shown on the Programming Options Summary Table (Table 4-1). The Five Digit Access code is returned to the factory de- fault value (12345).

Example: To initialize the EEPROM TO FACTORY

DEFAULTS PRESS: 1 9 #.

4.2.7Trunking System ID Number

All ST-852’s have a Trunking System ID Number from 0 to 31. All subscriber units on a trunking system must be programmed with the same trunking system ID num- ber. Subscriber units can only access ST-852’s with matching Trunking System ID Numbers.

For example, if a subscriber unit with a trunking system ID number of 1 tries to access a trunking system with a trunking system ID number of 5, access will be denied. If you wish to allow subscriber units to roam on differ- ent SmarTrunk II systems, all trunking system ID num- bers must be identical. The Trunking System ID Num- ber will be used in the future for roaming and network- ing features.

36