“HCO please” — to select HCO mode.

“HCO off please” — to turn off HCO mode.

!

W A R N I N G

When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting your phone’s speaker volume, see “VoiceVolume” on page 128.)

NOTE:TTY device manufacturer’s proprietary feature such as Turbo- Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Setting TTY Baud Rate

By default, your phone’s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the US. To make calls outside the US, set your TTY baud rate to 50.0.

To change the TTY baud rate:

1From the Initial Setup screen, press R to scroll to TTY Baud.

2Press B under CHANGE.

3Press S to scroll to the baud rate for your location.

4Press B under SELECT.

VoiceVolume

VoiceVolume sets the volume of the sound coming from your phone’s earpiece or speaker:

1From the VoiceVolume screen, highlight Earpiece Vol: to set the

earpiece volume, or press R to scroll to Speaker Vol: to set the speaker volume.

2Press B under CHANGE.

www.motorola.com/iden

128

Page 130
Image 130
Motorola i335 manual Setting TTY Baud Rate, VoiceVolume, 128