Here’s how it works. Let’s say you have a company voice mail account that you frequently check while traveling. And, to access that account you must do the following:
•Dial your work number
•Press # while the voice mail greeting is being played
•Enter your PIN to access your messages
You can program your phone to enter all of the above information for you. All you have to do is separate each entry with a pause. If you were to program your phone to automatically input the above information, the stored data would look like this 17035551234P#P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause. The # interrupts your greeting. The second P represents another 3 second pause. The last four digits represent your PIN.
You can use this feature not only to enter PINs and passwords but also to have the phone automatically select menu options (i.e., press 1 to hear messages).
To create a
Press and hold * for two seconds. The pause symbol (P) will appear on the display screen.
NOTE:You can enter up to 20 characters in a single entry, stored or dialed.
NOTE:If you use a system that will not let you enter an option until the automated message has played in its entirety, you can program your phone to pause for more than 3 seconds. For example, performing the above step twice will program two pauses and cause your phone to wait 6 seconds before entering the next set of numbers.
www.motorola.com/iden
50
