Preparing the Modem for Setup
Preparing the Modem for Setup
Before setting up your im240 Wireless Modem:
•Confirm that the SIM card is in place. See “SIM Card” on page 3
Installing on Windows ME
Use these instructions if you are installing onto a laptop running Windows ME. The installation wizard will prompt you to insert the im240 Wireless Modem into the PCMCIA slot.
1Turn on your laptop and start Windows.
2Insert the im240 Wireless Modem Installation and Application Software CD in your
•If the im240 Wireless Modem and Installation and Application Software installation program does not start automatically, select Start, Run, and then type d:\setup.exe, where d refers to the letter of your
3Use the Next and Back buttons to navigate through the wizard.
Using the default settings for the Destination Location and Program Folder is recommended unless you have special requirements and an advanced understanding of PC configuration.
4When prompted, choose Laptop as your installation platform.
5When prompted, insert your wireless modem into the available PCMCIA Type II slot. Click Ok.
6Upon completion of the installation, you will be prompted to reboot.
Installing on Windows 2000, and XP
Use these instructions if you are installing on to a laptop running Windows 2000 or Windows XP. The installation wizard will prompt you to insert the im240 Wireless Modem into the PCMCIA slot.
Note: You must have administrative rights to install on Windows 2000 or Windows XP.
Windows XP Only: In System Properties, right click on your My Computer icon then left click on Properties. Select the Hardware tab, click on Driver Signing. If the driver signing option is set to Block, then the Installation program will not be able to install the driver.
1Turn on your laptop and start Windows. If you are running Windows 2000 or XP log in with administrative rights.
7
