12 - 32 Symbol LS4208 Product Reference Guide
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code b elow, which contains only a start character, a
dash (minus), and a stop ch aracter.
•
The scanner issues a short high/low/high beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1. Scan the Transmit Buffer bar code below which contains only a start character, a plus (+), and a stop
character.
•The scanner transmits and clears the buffer.
•The scanner issues a low/high beep.
2. Scan a Code 39 bar code with a lea din g char a cte r ot he r tha n a space.
•The scanner appends new decode data to buffered data.
•The scanner transmits and clears the buffer.
•The scanner signals that the buffer was transmitted with a low/high beep.
•Scanner transmits and clears the buffer.
Clear Buffer
NOTE Because the Clear Buffer contains only the dash (minus) character, set the Code 39 length to include
length 1 before scanning this bar code.
Transmit Buffer
NOTE Because the Transmit Buf fer contains only a plus (+) character, set the Code 39 length to include length 1
before scanning this bar code.