RS-232 Interface 6 - 17
Nixdorf Beep/LED Options
When Nixdorf Mode B is selecte d, this indica tes when the scan ner sh ould b eep and tur n on its LED af ter a decode.
Ignore Unknown Characters
Unknown characters are characters the host does not recognize. Wh en Send Bar Codes with Unknown
Characters is selected , all bar code data is sent except for unknown characters, and no error be eps sound on the
scanner. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up to the
first unknown character and then an error beep sounds on the scanner.
*Normal Operation
(Beep/LED immediately after deco de)
Beep/LED After Transmission
Beep/LED After CTS Pulse
*Send Bar Code with Unknown Characters
Do Not Send Bar Codes with Unknown Characters