Chapter 6 RS-232 Interface
Introduction
This chapter describes how to set up the scanner with an RS-232 host. The RS-232 interface is used to connect
the scanner to poin t-o f- sa le de vice s, host computers, or other devices with an available RS-232 port (e.g., com
port).
If the host is not listed in Table 6-2, refer to the document ation for the host d evice to set communication parameters
to match the host.
Throughout the programming bar code menus, default values are indicated with asterisks (*).
NOTE The scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system
architectures requiring RS-232C signal levels, Symbol offers different cables providing TTL-to-RS-232C
conversion. Contact Motorola Enterprise Mobility Suppo rt for more information.
*Baud Rate 57,600 Feature/Option
* Indicates Default