Motorola LS4208 User Preferences

User Preferences 4 - 3
User Preferences
Default Parameters
The scanner can be rese t to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar
code below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom
default.
• Restore Defaults - Resets all default parameters as follows:
•If custom default values were configured (see Write to Custom Defaults), the custom default values are
set for all parameters each time the Restore Defaults bar code below is scanned.
•If no custom default value s were configured, the factory default values are set for all p arameters each time
the Restore Defaults bar code below is scanned. (For factor y default values, see Table A-1 on page A-1.)
• Set Factory Defaults - Scan the Set Fact ory Default s bar code below to eliminate all custom default values
and set the scanner to factory default values. (For factory default values, see Table A-1 on page A-1.)
• Write to Custom Defaults - Custom default p arameters can be configur ed to set unique default values for a ll
paramete rs. After changing all p arameters to the desired default values, scan the W rite to Custom Default s
bar code below to configure custom defaults.
*Restore Defaults
Set Factory Defaults
Write to Custom Defaults