Motorola LS4208 Standard Default Parameters A - 7

Standard Default Parameters A - 7
Transmit
Transmit Symbol in Codeword Format Disable 12-57
Transmit Unknown Codewords Disable 12-58
Character
Escape Character None 12-58
Delete Character Set ECI’s Transmit 12-59
Composite
Composite CC-C Disable 12-60
Composite CC-A/B Disable 12-60
UPC Composite Mode UPC Always Linked 12-61
Composite Beep Mode Beep as Each Code Type is Decoded 12-62
Symbology - Specific Security Levels
Redundancy Level 1 12-63
Security Levels 0 12-65
Bi-directional Redundancy Disable 12-66
Intercharacter Gap Normal Intercharacter Gap 12-66
Miscellaneous Scanner Options
Transmit Code ID Character None 13-3
Prefix Value 7013 <CR><LF> 13-3
Suffix Value 7013 <CR><LF> 13-3
Scan Data Transmission Format Data As Is 13-4
FN1 Substitution Values Set 13-6
Transmit “No Read” Message Disable 13-6
Synapse Interface Standard 13-7
Report Version 13-8
Report Synapse Cable 13-8
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page
Number
1
User selection is required to configure this interface and this is the most common selection.