Miscellaneous Scanner Options 13 - 3
Miscellaneous Scanner Parameters
Transmit Code ID Character
A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is
decoding more than one code type. In addition to any single character prefix already selected, the Code ID
character is inserted between the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character , or an AIM Code ID character. For Code ID Characters,
see Symbol Code Identifiers on pag e B-1 and AIM Code Identifiers on page B-2.
Prefix/Suffix Values
A prefix and/or one or two suffixes can be appended to sca n dat a for use in data editing. To set a value for a prefix
or suffix, scan a four-digit numb er (i.e. , fou r bar co de s fro m Appendix D, Numeric Bar Codes) that corres po nd s to
that value. See Table E-1 on page E-1 for the four-digit codes.
When using host commands to set the prefix or suffix, set the key category p arameter to 1, then set the 3-digit
decimal value. See Table E-1 on page E-1 for the four-digit codes.
To correct an error or change a selection, scan Cancel on page D-3 .
Symbol Code ID Character
AIM Code ID Character
*None
NOTE To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 13-4.