Motorola MVME197LE manual Efffffff

A

Configure and Environment Commands

Table A-1. ENV Command Parameters (Continued)

ENV Parameter and Options	Default	Meaning of Default
Slave Address Translation Address #2	00000000	This register will allow
		the VMEbus address
		and the local address to
		be different. The value
		in this register is the
		base address of the local
		resource that is
		associated with the
		starting and ending
		address selections from
		the previous questions.
		The default is 0.
Slave Address Translation Select #2	00000000	This register defines
		which bits of the
		address are significant.
		A logical one “1”
		indicates significant
		address bits, logical zero
		“0” is non-significant.
		The default is 0.
Slave Control #2	0000	This defines the access
		restriction for the
		address space defined
		with this slave address
		decoder.
Master Enable #1 [Y/N]	Y	Setup and enable the
		Master Address
		Decoder #1.
Master Starting Address #1	02000000	This is the base address
		of the VMEbus resource
		that is accessible from
		the local peripheral bus.
		The default is the end of
		calculated local
		memory.
Master Ending Address #1	EFFFFFFF	This is the ending
		address of the VMEbus
		resource that is
		accessible from the local
		peripheral bus.

A-10 Installation Guide