PROGRAMMING RX (RECEPTION) CODES (CTCSS/DPL)
Once you have chosen the channel you want to program, short press the PTT button or MENU to scroll through the options until you reach the ‘Code Programming Mode’.
The radio display will show the blinking CTCSS/DPL code as follows:
PROGRAMMING FEATURES | RX |
| |
To program the desired code, scroll up/down | |
with the | / buttons until you get the |
CTCSS/DPL code value you want to set up. | |
Long press the PTT button to exit and save. | |
English 44
PROGRAMMING SCRAMBLE 
The scramble feature makes your transmissions sound garbled to anyone listening without the same scramble code.
It does not guarantee confidentiality, but it adds an extra layer of privacy. Scramble default value is OFF.
Once you have entered ’Programming Mode’ and selected the channel in which you want to enable Scramble (
), scroll up/down through the programming options by short pressing the PTT button, until your radio reaches the ‘Scramble Programming Mode’:
The current scramble setting will blink. You can select the desired scramble value (0,1,2 or 3) by pressing the 
/ 
buttons. Long press the PTT button to exit and save or short press the
