PROGRAMMING FEATURES
To program the CTCSS/DPL code, scroll through the programming options by short pressing the PTT button until your radio display shows:
TX |
To program the desired code, scroll using 
/ 
buttons until you get the desired CTCSS/ DPL code value. Long press the PTT button to exit and save or short press the PTT button to
go to the next programming feature without saving.
To program the Bandwidth TX scroll down/up
with the 
/ 
buttons until you get the following screen:
TX | BW |
To program the desired bandwidth (HI = 25 kHz, LOW = 12.5 kHz), toggle the 
/ 
buttons to select the value. Long press the PTT button to exit and save or short press the PTT button to go to the next programming feature without saving.
Note: If the value of the bandwidth can not be changed, the setting will be displayed solidly
