for a particular channel, do not press SB2 button to start scanning, as the radio will do it automatically.
Programming Scan List
You can enable/disable the Channel Scanning feature for each channel in your radio. To do so, enter ’Programming Mode’ and select the channel you want to program. Scroll through the programming options by short pressing the PTT button until you reach the ‘Scan Programming Mode’. The radio display will show the scan icon as follows:
YES |
Both the channel number and current scan setting (YES=ON or NO=OFF) will be blinking on the display, indicating that you can choose your setting. To set the channel number, press
the |
|
| / |
| buttons until you reach the desired |
|
channel number. |
| |||||
Once you have selected the channel, proceed |
| |||||
to enable (‘YES’) or disable (‘NO’) the scan |
| |||||
feature by toggling the SB2 (*) button. Once |
| |||||
you have set the values you need, long press |
| |||||
the PTT button to save an exit. |
| |||||
Notes: |
|
|
| |||
• (*)This assumes the SB2 button is not being | PROGRAMMING FEATURES | |||||
| programmed for a different mode. | |||||
|
| |||||
• If the MAX CHAN setting in the radio is set to |
| |||||
| 1, the Scan Programming option will not show |
| ||||
| (will be disabled). |
| ||||
|
|
|
|
|
|
|
49 English
