Motorola RDU2080 manual Programming Buttons, Editing Channel Alias Name

	PROGRAMMING BUTTONS
	You can map any channel to either button B or
	C as a preset channel. To enable, enter
	’Programming Mode’ and choose the channel
	you want to set as preset channel using the /
		buttons. Once you have selected your
	channel, press and hold the B or C button for
PROGRAMMING FEATURES	2 – 3 seconds.
	A short press of either preset button (B and C)
	will play a good key chirp.
	When scanning, a short press of either preset
	button will change the home channel to the
	preset channel. The radio will display FREQ/PL
	and will continue to scan from the new home
	channel.
	EDITING CHANNEL ALIAS NAME
	To edit a channel’s alias, turn ON the radio and
	press and hold the PTT button and the
	button for 3 seconds. Upon entering the
	‘Channel Alias Mode’, the radio will generate a
	special beep. You will see the current channel

English 50

alias name and channel number blinking as follows:

Choose the channel number you want to edit by pressing the / buttons. Once you have selected the channel number, press the PTT button or MENU to start editing the channel name. If you want to exit the Channel Aliasing Mode long press the PTT button.

•A cursor will blink at the end of the channel name. Use button B to move the cursor to the left. If you're in the first character, the radio will give you a bonk tone. Whenever you press