Bandwidth will be available. If the repeater feature is mapped (using CPS) to one of the radio buttons, then the repeater icon will blink. This indicates that you can use the repeater ‘button’ to toggle ON/OFF repeater. If repeater is not enabled in the radio this icon will not be displayed.
To program the Frequency TX, scroll through the radio options until your display shows:
TX |
Once you have selected the channel you want to set up for repeater operation, you can move between the Programming options by short pressing the PTT or MENU button to program the frequency, code and bandwidth for the repeater channel.
To program the desired frequency, scroll using the 
/
buttons until you get the desired frequency code value. Long press the PTT button to exit and save or short press the PTT button to go to the next programming feature without saving.
Note: If your radio displays the 
(Power Select) icon refer to note in ‘Programming RX (Reception) Bandwidth’ section for further explanation.
