Motorola RDU2080 manual Nuisance Channel Delete, CPS Computer Programming Software

FEATURES

PROGRAMMING

English

NUISANCE CHANNEL DELETE

Nuisance Channel Delete allows you to temporarily remove channels from the ‘Scan List’. This feature is useful when irrelevant conversations on a ‘nuisance’ channel tie up your radio's scanning features. To delete a channel from the scan list:

•Start ‘Scan Mode’ by short pressing the SB2 button (*)

•Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to delete it.

•The channel will be removed until you exit ‘Scan Mode’ by pressing the SB2 button again or if radio is turned OFF.

Note: (*)Assumes the SB2 button is not programmed to another function different from the default.

52

CPS (COMPUTER PROGRAMMING SOFTWARE)

Radio to be programmed

		USB
Drop-in		Connector
Charger		CPS
Tray
	Mini-connector	Programming
		Cable

The easiest way to program or change features in your radio is by using the Computer Programming Software (CPS) and the CPS Programming Cable(*). CPS Software is available for free as web based downloadable software at:

www.motorolasolutions.com/RDX

To program, connect the radio via the Drop-in Charger Tray and CPS Programming Cable as shown in the picture above.