Motorola RDU2080 manual Cloning Radios using the CPS Computer Programming Software

	1.	Make sure that the radio batteries on both
		radios are fully charged.
	2.	Verify the cloning cable connection on both
		SUCs.
	3.	Make sure that the battery is engaged properly
		on to the radio.
	4.	Make sure that there is no debris in the
PROGRAMMING FEATURES		charging tray or on the radio contacts.
	5.	Verify that the source radio is in cloning mode.
	6.	Make sure that the radio to be cloned is turned
		ON.
	7.	Make sure that radios are both from the same
		type (same frequency band, same front panel
		(display/non display), same region and same
		transmission power).
	Note:	This cloning cable is designed to operate
		only with compatible Motorola RLN6175

(Standard) and RLN6304 (Rapid) Single

Unit Chargers.

When ordering Cloning Cable please refer to P/ N RLN6303. For details about accessories refer to Accessories section.

English 58

Cloning Radios using the CPS (Computer Programming Software)

To clone RDX™ radios using the CPS software, you will need to have available the CPS, a Drop-in Charger Tray and the CPS Programming Cable. Information on how to clone using the CPS is available either in

•the CPS Help File --> Content and Index --> Cloning Radios or

•in the CPS Programming Cable Accessory Leaflet.

To order the CPS programming cable, please refer to P/N RKN4155. For details about accessories refer to the Accessories Section.

Repeater Capabilities

Programming Repeater Capability

You can only program Repeater Frequencies if your radio has been previously configured via

the CPS. The repeater icon will appear solid, and the MENU options for programming TX frequencies, TX CTCSS/DPL codes and TX