Motorola SL4000, SL4010 manual Contacts Settings,  Restoring a Nuisance Channel

Procedure:

1When your radio "locks on to" an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone.

2Release the Nuisance Channel Delete button. The nuisance channel is deleted.

Deleting a "nuisance" channel is only possible through the programmed Nuisance Channel Delete button. This feature is not accessible through the menu.

 Restoring a Nuisance Channel

	Procedure:
Features	To restore the deleted nuisance channel, do one of the
	following:
	•	Turn the radio off and then power it on again,
	•	Stop and restart a scan via the programmed Scan button or
		menu, OR
Advanced	•	Change channel or zone.

40

Contacts Settings

Contacts provides "address-book" capabilities on your radio. Each entry corresponds to an alias or ID that you use to initiate a call.

Each entry, depending on context, associates with one of five types of calls: Group Call, Private Call, All Call, PC Call or Dispatch Call.

PC Call and Dispatch Call are data-related. They are only available with the applications. Refer to the data applications documentation for more information.

NOTE: If the Privacy feature is enabled on a channel, you can make privacy-enabled Group Call, Private Call, and All Call on that channel. Only target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission.

See Privacy on page 69 for more information.

Additionally, the Contacts menu allows you to assign each entry to one or more programmable number keys on the keypad.If an entry is assigned to a number key, your radio can perform a quick dial on the entry.

Your radio supports maximum of 1000 Contact list entries.

Each entry within Contacts displays the following information:

•Call Type

English