Motorola SL4000, SL4010 manual  Reinitiating an Emergency Mode,  Exiting Emergency Mode

Models: SL4010 SL4000

1 112
Download 112 pages 37.81 Kb
Page 68
Image 68

Reinitiating an Emergency Mode

NOTE: This feature is only applicable to the radio sending the Emergency Alarm.

There are two instances where this can happen:

You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency Alarm is enabled on this new channel, the radio reinitiates Emergency.

You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency.

Advanced Features

56

Exiting Emergency Mode

NOTE: This feature is only applicable to the radio sending the Emergency Alarm.

Your radio exits Emergency mode when one of the following occurs:

Emergency Alarm acknowledgement is received (for Emergency Alarm only), OR

All retries to send the alarm have been exhausted, OR

The Emergency Off button is pressed.

NOTE: If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the Emergency mode automatically when it is turned on again.

If you change channels when your radio is in Emergency mode to a channel that has no emergency system configured, No Emergency is shown on your display.

English

Page 68
Image 68
Motorola SL4000, SL4010 manual  Reinitiating an Emergency Mode,  Exiting Emergency Mode