Motorola V.100 manual SIM Card and Battery Installation, Charging your battery

Getting Started

12

SIM Card and Battery Installation
1. Remove the battery cover.	Battery		Slide Battery
2. Slide the SIM card into the recess
			Door Lock to
	Compartment
so that the notch in the card lines up with
			Open
the notch in the recess.
3. Align the contacts on the battery with the
contacts in the battery compartment and
press downwards toward the contacts
until the battery clicks into place.
4. Replace the battery cover.
Note: If the SIM card is inserted incorrectly,
“Check Card” is displayed. Remove the SIM
card and re-insert it. If the card does not	Slide to Remove
work, contact your service provider.	Battery Door
Charging your battery:		SIM Card		Battery
• Charge the battery by inserting the
				Charger
		Recess
adapter plug into the port on your				Port
communicator and plugging the adapter
into a wall outlet.

•Charge your battery at room temperature and never leave it in really hot, cold, or wet places.

•Charge only Motorola batteries in your communicator.