Motorola VU30 manual Charge the battery, To charge using the charger, To charge from your computer

charge the battery

New batteries are not fully charged. Before you can use your phone, you need to install and charge the battery. Some batteries perform best after several full charge/discharge cycles.

To charge using the charger:

1Insert the charger

into the micro USB port on your phone as shown.

2Plug the other end

of the charger into the appropriate electrical outlet.

3When your phone displays Charge Complete, remove the charger.

When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the

indicator must be visible to ensure full phone functionality while charging.

To charge from your computer:

You can also charge your phone’s battery by connecting a cable from your phone’s micro USB port to a high-power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer.

Both your phone and your computer must be turned on, and you must have correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately.

Notes for charging your phone’s battery:

•When charging your battery, keep it near room temperature. Never expose batteries to

essentials 15