Motorola XTS 3000 manual Special Radio Features, Dynamic Regrouping

Exception to this Note

4

Special Radio Features

Dynamic Regrouping

The dynamic regrouping feature allows the dispatcher to temporarily reassign selected radios to a single special channel so that they can communicate with each other. This feature, enabled in each radio by means of the radio service software, is typically used during special operations. You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher.

Note

If you select the dynamic-regrouping zone/channel using radio controls without being dynamically regrouped, an invalid tone will be heard.

1.When your radio has been dynamically regrouped, you will hear a “gurgle” tone (unless you are already on the dynamic-regrouping zone/channel), and your radio will be automatically switched to the dynamic-regrouping channel.

Note

If you are using a radio control knob or switch to select the zone or channel — Until you select the correct dynamic- regrouping position, you will not be able to select scan, telephone call, or Private Conversation call feature, and you will hear a gurgle tone each time you press the PTT Switch. This is a reminder to you that you are transmitting on the dynamic-regrouping channel, not the zone or channel indicated by the position of the radio control.

If your radio is programmed as a select- enabled radio — Once you select the

correct dynamic-regrouping position, you can change the radio’s zone or channel knob/switch position, press the PTT Switch, which will transmit on the dynamic-regrouping zone/ channel, and you will not hear the “gurgle” tone.

25