Introduction
Belt-Clip Installation and Removal
Note
The battery must be removed from the radio before the belt clip can be installed or removed.
Installing the Belt Clip
1.Hold the battery in one hand so that the top of the battery faces upward and the back of the battery faces you.
2.Holding the belt clip in the other hand with its top facing upward, align the slide assembly on the back of the belt clip with the slots on the back of the battery.
3.Slide the belt clip downward toward the bottom of the battery until the belt clip “clicks” in place.
Slide
Assembly
Slots
Belt Clip
Battery
Removing the Belt Clip
1.Hold the battery (with belt clip installed) in one hand so that the top of the battery faces upward and the front (radio side) of the battery faces you.
2.At the top of the battery, press down on the belt clip’s metal tab and slide the belt clip upward until it disengages from the battery.
3.Continue to slide the belt clip upward until it is free from the battery.
Press
Down 
Metal 
Tab
8
