OPERATION PROCEDURES
TO FIND A SATELLITE
If the Mount Type is SKEWABLE (Models MD500 and MHDTV)
1.Turn ON power.
2.After
The dish will search out and lock onto the proper programmed satellite.
3.Pressing the FIND button while on satellite will initiate a
If the Mount Type is NON-SKEWABLE (Executive (One LNB))
1.Turn ON power.
2.After
The dish will search out and lock onto the proper programmed satellite.
3.Pressing the FIND button while on satellite will initiate a ‘FIND NEXT SATELLITE’ routine.
If the Mount Type is a NON-SKEWABLE FREEDOM (using the Nomad 2)
1.Turn ON Power.
2.If ON a Satellite when turning the Power ON, the system will search for the next available satellite in sequence.
3.If NOT ON a Satellite, the system will search for the primary satellite for the service subscribed to.
4.Once the system has located a satellite, the Power will turn OFF.
When Power is turned ON the system will go through steps
TO STOW THE DISH
1.Press the STOW button and the dish will stow, or return, to the proper travel position.
After the dish has been properly stowed, the power will automatically turn OFF.
6
