3.Enter the CAP address of the C168P board to be configured.
4.Configure the following parameters as necessary.
Port Index Indicate the port index for each port.
I/O address Enter the base I/O address for each port, either sequentially or not. Avoid to conflicting with any other devices.
IRQ | Enter the IRQ, 2, 3, 4, 5, 7, 10, 11, 12 or 15, for each port, |
| independently or not. |
Speed | This field specifies the use of normal or high speed capability. |
| Normal speed ranges from 50 bps to 115.2 Kbps. High speed |
| ranges from 50 bps to 921.6 Kbps. C168P support only normal |
| speed spectrum. In other word, it is not available for speed |
| faster than 115.2K bps. |
